Wires Twisting Machine RSM-WTM-20A

0.00
0.00
Quantity:
(Inventory: 1000)
Buy now
Add to cart
  
Description
Feature
Equipped with two sets of twisting units can process the wires alternatively, wire clamps/grippers driven by air.
Wire twisting from direction of clockwise or anticlockwise is setable.  
Pulling force is constant when the wires processed. Rotation number can be setable as well.
The wire grippers equipped with PU blocks ,providing better protection to the wires, to guarantee the wires have no marks and damages.

Process Flows
Load the two wires to the  both ends of wire grippers.
Machine will start to twist the wires from clockwise dierection with low roation speed and stop after the setting round number achieved to eleminate the stress.
Then machine will re twist the wires from clockwise direction with high rotation speed and stop after the setting round number achieved.
The machine will twist the wires from direction of anti clockwise with low rotation speed to eliminate the stress again and  stop after the setting round number achieved.
The wires will be released to the wire collecting slot after the process done.

Specification  
Model RSM-WTM-20A
Language Chinese and English HMI Or Customized
Rotating Clamps 2~5 clamps (with sensor control)
Air Pressure 0.5MPa
Motor rpm 100~3500r/min
Twisting length 300mm~15000mm
Wire Size 0.35 mm²~2.5mm²
Twist Pitch Tolerance 15mm士2，20mm+2，25mm士3，35mm士4,45mm+5
Memory 2000 pcs twisting-programs
Voltage 220V 50Hz 5A
Twisting Length
 300 mm ~5000 mm or Customized
Net Weight
 400 Kg
Gross Weight
 450Kg
Dimension
 6500*730*1260 (height will be1700mm if processing condition board includedthe length will be increased ifthe twisting length is over 5000mm)

PDF Specification Download
RSM-WTM-20A.Pdf




I have a question Buyers Q & A Total 0 Record
    No evaluation information
Product
Name
E-mail
TEL
Title
Content
Submit
Leave Message To Us
Product
Home