Sleeve Insertion Machine RSM-SIM-2000

Description

Feature

Special design for the sleeve cutting and insertion process, sleeve cutting length is setable on HMI.
Adopt the way of thermal cutting to make sure the neat cutting edge without burrs.
High accuracy with sleeve cutting length tolerance of ±3MM.
Productivity more than 600 pieces per hour,which can be increased by skilled operator, highly improve the production efficiency compared with manual process.
Wide application range, suitable for the sleeve insertion process of automotive wire harness, electronic wire, medical wire, metal, wire and cable.

Specification

Model	RSM-SIM-2000
Applicable Sleeve	shock-proof nylon sleeve or other fusible materials
Applicable wire scope	customized (wire’s dimension does not exceed the I.D. of the feeding tube)
Suitable Feeding Tube	I.D. 6-25mm
Cutting Length Tolerance	±3MM
Sleeve Insertion Length	100-1500mm(Customizable)
Tape diameter	300mm
Productivity	≥600PCS/h (Depends on manual speed)
Voltage	AC 220V/50HZ (Single-phase)
Power	400W
Ambient Temperature	-5℃～+40℃
Relative Humidity	(40～90)%RH
Air Source	0.4～0.6MPA
Weight	180KG
Dimension	500W1350L1400H(mm) (subject to actual production)

Note: Material out of range can be customized

Standard Parts

Tool box, Hex wrench, Slot-type screwdriver, Open-end wrench, Scissors, Upper&lower grip sleeve 2, Silicone rubber rollers, Sleeve cutters, Heating tube