Stripping chance for wire processing industry has a long history, it brings convenience to promote the rapid development of all walks of life, but if you don't have the right operation method, so it is a good machine is useless to you, and so is this kind of machine equipment, wire stripping machine below we carefully explain wire stripping machine safety operation procedures!
1. Before starting the wire stripper, check whether the electrical appliances and transmission system are normal, remove oil and garbage from all parts of the machine, wipe it clean, and put the tools, molds, materials and containers to be used in a favorable position for work.
2. Confirm whether the processed wire can be processed with this machine
3. Set parameters (wire length, stripping length, total number, number, speed, etc.) as required.
4. Choose blades of different specifications for different wires (general wire, flat knife for wire arrangement, shielded wire and fork knife for large wire)
5. Adjust the distance between the knife and the knife according to the stripping requirements, and determine the length of the wire
6. Pull the wire to the wire clamping mechanism, adjust the tightness and ensure that the wire is not clippe
7. Do not pile up sundries and tools near the moving parts when starting the machin
8. Manually operate after confirming the accuracy, and then turn on the cable automatically
9. When adjusting, pay attention to the distance between the wire clamping mechanism and the blade is not too close to avoid collision
10. Protective net must be placed in place before automatic operation
11. When the wire stripper is working, do not extend your hand under the protective net. It is forbidden to take off the cutting and processed wire directly from the clamp
12. If you need to modify the parameters during processing, you must stop the machine for adjustment
13. Cut off the power supply after the work of the wire stripper, and do 5S and daily maintenance work of the wire stripper
The above is the safe operation rules of the wire stripper. The normal operation method can reduce the failures of the machine. I hope you can run the wire stripper correctly.